Our Powders can be mixed with any
CLEAR drying mediums
such as polyurethanes, epoxies, plastics or acrylic emulsions
and then when charged with
UV / FLUORESCENT LIGHT or SUNLIGHT,
it will render that material to glow in the total darkness for hours.
All powders are Specially Encapsulated / Coated for use in either water or solvent based mediums.
Remember to SEE PRODUCT GLOWING
it must be Charged with
AND THEN TOTAL DARKNESS FOR FULL COLOUR GLOW EFFECT
DIRECT SUNLIGHT is best for MAXIMUM results,
followed by UV (ULTRA VIOLET) tube or torch
Fluorescent Bulbs ( Normal Long ) and Energy Saving Bulbs
( that fit into normal standard light fittings )
that are easily available from all stores will also charge to a very good affect glow but will take longer to achieve
Normal House Bulbs ( Incandescent - not power saving bulbs )
and Normal LED bulbs will take very long time to charge with low poor results
AND WE DO NOT ADVISE
( Please note just mixing with water will not work )
To achieve your desired thickness / consistency we advise you experiment with small proportions of powder
and different types of clear liquid or medium to find the best suitable end result for your desired application / project.
We Recommend 20 \ 40% ratio
of powder to 100% CLEAR liquid / medium.
APPROXIMATELY 10g POWDER to 10ml 100% clear medium liquid
to make 15ml TOTAL VOLUME
( The More Ratio added the Stronger the Glow )
ALWAYS TEST ON SMALL AREA 1ST BEFORE STARTING MAIN PROJECT TO SEE END GLOW RESULTS
For Best Maximum Glow we recommend application to a WHITE coloured surface
ALPHA INDUSTRIES INC.
GLOW IN THE DARK POWDER
All rights reserved.